Centsys Lattice Installation Manual page 56

update all tags.
4.3.1.2. If the "Admin" tag is presented and removed while "NO" is visible, the display
scrolls vertically down to "yES". If "yES" is selected by presenting and holding
the "Admin" tag for 5 seconds, then the system will link all tags existing in the
system to all heads. The display will temporarily (depending on the number of
tags to be updated) flash up the text "bSy" (an abbreviation for busy) and then
the text "dnE" (an abbreviation for Done) to indicate all the tags have been
updated.)
4.3.2.Update by "Id". If update by ID was selected then the display will be indicating ID
number "000".
4.3.2.1. Select the required ID by presenting and removing the "Admin" tag to
increase (or decrease) the ID (see details of ID selection symbol described
previously)
4.3.2.2. When the correct ID is selected, WAIT for approximately (e.g. 126 in the example
shown)
4.3.2.3. When the display changes to "Set", present and remove the "Admin" tag. If
successful the display will indicate "Con" (see part 2 of 2 on the Update menu)
4.3.2.4. Select the head (i.e reader) at which tags need to be updated by scrolling
vertically through the attached heads "Con", and any RSH's shown as H.01 to
H.31 (only those linked at the time will reflect) by presenting and removing the
"Admin" tag.
4.3.2.5. Once the head is selected by presenting and holding the "Admin" tag for 5
seconds, the display will move from level n+1 to level n+2 indicated by "ASC".
4.3.3.6. Presenting and removing the "Admin" tag will scroll vertically through the
• ASC - Associations
• APb - Anti-Pass Back
• Ltd - Limited Uses Counter
• OLA - Off-Line Access
• "---" - Exit back to Previous Menu
Once a specific menu item is decided upon, the display is moved, horizontally,
from level n+2 to level n+3 by presenting and holding the "Admin" tag for 5
seconds. E.g. If "ASC" is displayed and the "Admin" tag is presented and held
for 5 seconds, then the display changes from "ASC" to "CH.1"
4.3.2.7. The various options presented in level n+3 depend on what was selected in
level N+2. For example:
4.3.2.7.1. If "ASC" was selected then channel 1 or 2 (only channel 1 can be
4.3.2.7.2. If "APb" was selected then an anti-pass back level L.01 to L.07 is
NOTE: The "OLA" menu will only appear for RSH's. It does not apply to
the L1000.
selected for RSH's) is first chosen by scrolling vertically through
Ch.1, Ch.2 (or "---" if exit to a previous level is required) by
presenting and removing the "Admin" tag. The resultant choice is
selected by presenting and holding the "Admin" tag for 5 seconds.
first chosen by scrolling vertically through the levels L.01 to L.07
(or "---" if exit to a previous menu is required) by presenting and
removing the "Admin" tag. The resultant choice is selected by
presenting and holding the "Admin" tag for 5 seconds.
Page 51