Centsys Lattice Installation Manual page 46

3.4.1.13.13
3.4.1.14 SSC - (Smartswitch II Configuration)
3.4.1.14.1 SSr - (Smartswitch II on relay output)
3.4.1.14.2 SSA - (Smartswitch II on alarm output)
3.4.1.15 rdC - (Relay to door configuration)
3.4.1.15.1 rL1 - (Relay 1 configuration)
3.4.1.15.2 rL2 - (Relay 2 configuration)
3.4.2. dSP - (Display Brightness). The brightness can be varied in 10% increments.
3.4.2.1. Present and hold the "Admin" tag for 5 seconds to select brightness options. The
display will indicate the current display setting. By default this is 50% (i.e. 050)
3.4.2.2. Present and remove the "Admin" tag to scroll through the settings which vary
between 1% and 100% in 10% steps.
3.4.2.3. Present and hold the "Admin" tag for 5 seconds to activate the setting selected in
3.4.2.2. above.
3.4.3. AUS - (Advanced User Structure). By default the system always operates with the Basic User
menu structure. If the Advanced user menu is turned on from the Basic menu then the
Advanced menu will become active for a period of 20 minutes, thereafter reverting back to the
Basic menu. If the Advanced user menu is turned ON from the Advanced Menu it remains
permanently active until turned OFF.
3.4.3.1. Present and hold the "Admin" tag for 5 seconds to select the AUS options.
The display will indicate ON.
3.4.3.2. Present and remove the "Admin" tag to scroll vertically through the options:-
• On - Turns the Advanced Menu ON
• OFF - Turns the Advanced Menu OFF
• " --- " - Exits to previous menu
3.4.3.3. Present and hold the "Admin" tag for 5 seconds to activate the setting selected in
3.4.3.2. above.
3.4.4. AtC - (Advanced Tag Control). This menu enables additional "Admin" tags to be created.
Warning: Additional "Admin" tags is a security risk unless these tags are carefully
monitored and controlled.
3.4.4.1. Present and hold the "Admin" tag for 5 seconds to select the AtC option. The
symbol will be displayed.
3.4.4.2. Present the tag whose admin rights are to be changed. The current rights will be
displayed (either ON or OFF).
3.4.4.3. Repeatedly present and remove a master tag, selecting either "Admin" rights On, OFF
or ... (escape).
3.4.4.4. When required setting is displayed, present and hold a master tag until
displayed. The tag's admin rights have now been updated.
EPA - (External panic alarm) This sets whether the external alarm
output activates during a panic
alarm
Page 41
is