Normal Learn - Centsys Lattice Installation Manual

Icon
Description of QUIK
No
3 The display changes to "Lrn" to indicate the system is in Learn mode.
4 Present and remove the first new tag to be learnt into the system.
5a On presentation of the first tag the display indicates the ID number into which this
tag has been learned. Eg. 001
5b On removal of the tag the display reverts back to "Lrn" indicating that the next tag
can be learned.
6 Present and remove the second tag to be learned.
7a
On presentation of the second tag the display indicates the ID number into which
this tag has been learned. Eg. 002
7b On removal of the tag the display reverts back to "Lrn" indicating that the next
tag can be learned.
TM
Table 4. Quik Learn Description
NOTE:
If tags are numbered make sure they are presented to the L1000 in the correct
order.
When first used, the ID number starts at 001 if the QUIK learn feature is invoked.
If tags already exist in memory, then Quick learn will start from the next available
ID number.
The QUIK learn feature will set factory defaults only, and none of the advanced
functionality will be learned. Thus tags will have the following basic functionality:
Tags are learned, automatically, into any LSH active on the system at the
time of programming.
Tags will operate the main relay on the L1000 and LSH's.
There is no anti-pass back.
No limited uses counters are set.
Relay 1 of the L1000 will operate by default for a 3 second pulse.

Normal Learn:

1.2.
There is an alternative way to enter new tags which provides the ability to set all the
attributes for a tag. The menu structure is shown in Figures 21 and 22.
TM
Learn procedure continued from previous page
Page 30