Centsys Lattice Installation Manual page 61

Description of Copy Process:
Note: Before a template can be copied as detailed below, it is necessary to first set up a template
(see Template menu). If a template already exists, continue with these instructions.
5.1. Present and hold the "Admin" tag for 5 seconds to move from the main menu item "CPy", to
level 1. The display will indicate "duP" (an abbreviation for duplicate)
5.2. Presenting and removing the "Admin" tag to scroll the display vertically, allows deletion of
tags by:-
• dUP - The template is taken from an existing tag and duplicated on any new tags presented,
• 1 - Each new tag copies the template and its ID Reference becomes the next available ID. i.e.
There is only 1 tag per ID.
• N - Each new tag copies the template and is added to a designated group. i.e. there are "n"
new tags added to the group.
• "---" - Exit to previous menu
5. 3. Present and hold the "Admin" tag for 5 seconds after a selection is made from the above.
5.4.If "duP" is selected the following symbol
must be presented.
5.4.1. If an existing tag is presented to the reader, then the information from this tag will be
duplicated to new tags. The display will indicate "tPL " (template) to indicate that this tag
exists in the system, and has become the template.
5.4.2. Present one, or more, new tags to the reader in sequence. Each time a new tag is
presented the display will indicate the ID number to which this tag has been assigned.
The system will start with the next available, unassigned, ID when the first new tag is
presented.
5.5. "1"Copy - If "1" is selected by presenting and holding the "Admin" tag for 5 seconds, the
display will indicate "000".
NOTE: Remember that this sub-menu item assumes that a valid template exists in
memory. If not go to the template setting menu.
5.5.1. Use the "Admin" tag and the red and green LED's to scroll to a required ID into which the
first new tag to be copied should be entered. (e.g. Say n=016)
5.5.2. Present the first new tag to be learned. The display will momentarily flash up "dnE"
(done) and then increment the ID by one indicating that this tag has been learned into
the system. The display will now be at the incremented value, (e.g. n+1=017) now. If a
second new tag in presented it will be allocated to this new incremented ID, etc, etc.
5.6. If "n" - Copy Multiple Tags to Single Id. is selected by presenting and holding the "Admin"
tag for 5 seconds, the display will indicate "000".
5.6.1. Use the "Admin" tag and the red and green LED's to scroll to a required ID into which the
first new tag to be copied should be entered. (e.g. say n=122)
5.6.2. Present the first new tag to be learned. The display will momentarily flash up "dnE"
(done) and then revert back to the originally selected ID number (i.e. "n" remains at
n=122). Additional new tags can be presented which will all be learned into this same
ID number shown in the display.
will be displayed. This indicates that a tag
Page 56