Centsys Lattice Installation Manual page 68

Summary of Display abbreviations used during programming of the L1000.
Door forced alarm disabled on Door 1
Door forced alarm disabled on Door 2
Door Open Time (before alarm sounds)
Door Sense Configuration
Erase All
Exit to previous menu
Fire (refers to FRX-FIRE input being used as a fire alarm input)
Firmware ID (revision)
Firmware Revision Number - Numeral indicative of the latest revision, e.g. V1.01
Flashing bar to indicate normal run mode
Free Exit (refers to FRX-FIRE input being used as a free-exit input)
Free Exit, Fire or Panic Input Select Menu
Full (indicates that the memory is full)
Head (i.e. either the L1000 or a remote slave head)
Head number 1 (i.e. a specific RSH between 1 and 31)
Head Settings eg. Relay times.etc.
Identification number
Identity Number 000 (000 to 999 exist)
In (refers to direction of travel when moving through anti-pass back levels))
n+1 Indicates next arbitrary number = n+1
n
Indicates some arbitrary ID number = n
Page 63