Centsys Lattice Installation Manual page 42

Level 1 Main Main
A
= EXIT to previous Menu
Fig 24 Part 2 of Advanced "Delete" Structure
2.3.3.2. Once the head is selected, present and hold the "Admin" tag to move from level
2.3.3.3. Selection of "ALL ", "Id", "tAg", or "---" (exit to previous menu) is done by
2.3.3.4. If "ALL " tags must be deleted move to level 4 by presenting and holding the
2.3.3.5. If delete by "Id" is required move to level 4 by presenting and holding the
2.3.3.5.3.
Advanced "Delete" Menu Structure - part 2
Level 2
2 to level 3 . Display will indicate "ALL " (Delete all tags in this head). At this stage
there are a number of different ways in which the tags can be deleted. Viz:
• Delete all tags in the head selected by selecting "ALL "
• Delete tags in this head by ID number. The system will automatically prompt
the user with only those Id's actually stored in this head.
• Delete tags using specific available tags.
presenting and removing the "Admin" tag.
"Admin" tag.
2.3.3.4.1. Rotate vertically through the selections "yES" (delete all tags), "No"
(do NOT delete all tags), or "---" (exit to previous menu) by presenting
and removing the "Admin" tag.
2.3.3.4.2. Confirmation of the selection of "yES" or "No" is made by presenting
and holding the "Admin" tag for 5 seconds.
"Admin" tag.
2.3.3.5.1. The display will indicate the lowest ID number stored in this head. The
green LED in the centre of the reader will also be illuminated.
2.3.3.5.2 Scrolling vertically through the list of all Id's stored in the head can be
done by presenting and removing the "Admin" tag.
Warning: Once the step described below is performed the delete process cannot be
reversed. The tag would have to be re-learned (or associated with this head) for it to
be seen as a valid tag.
Level 3
B
Page 37
Level 4 Level 5
n