Advanced Menu; Quik Learn - Centsys Lattice Installation Manual

Advanced Menu

The Advanced Menu Structure comprises the following first level sub-menus: -
LrN - Learn (Quik-Learn & Basic Learn)
dEL - Delete
CFg - Configure
Ltd - Limited Uses Counter
Upd - Update Tags
CPy - Copy Template or Tags
tPL - Template Setup
"---" - Exit
Each of these menus is described in more detail below.
1. Learn Menu
There are two learn mechanisms that exist under this menu. The first is Quik Learn, which
automatically learns any tag presented to the system into all active heads on the RS485 network
using the next available ID number. i.e. Only one tag is linked to a unique ID number. A maximum
of 999 tags can be added in this way. The second learn method enables one or more tags to be
learned into specific IDs or into specific heads and if required, for each tag to have its own unique
characteristics such as anti-pass back, relay times, limited uses counters, etc.

Quik Learn

1.1.
The QUICK learn feature enables new tags to be entered very quickly into the system. The
flow diagram below shows the QUIK Learn Procedure and is described fully below:
Icon
No
1 The display "Ad1" indicates that the system is in normal RUN mode and that a
correct "Admin" tag is being presented. The system cannot be programmed if any
tag other than the"Admin" tag is presented.
Present and Hold the"Admin" tag for 5 seconds.
2
TM
(identity number)
TM
1 2
4 5a
6 7a
Description of QUIK
TM
TM
Quik Learn
At this stage the system is ready to have
3
new tags learned in
Tag 1 has now been learned into ID
5b
Number 001
7b
Tag 2 has now been learned in, etc, etc.
TM
Learn procedure shown above
Page 29
TM