Centsys Lattice Installation Manual page 65

6.3.2. Once a reader is selected (as per 3.1. above), the display is moved from level 2 to level 3
by presenting and holding the "Admin" tag. e.g. if "Con" is displayed and the "Admin"
tag is presented and held (for at least 5 seconds) the display will change from "Con" to
"ASC".
6.3.3. By presenting and removing the "Admin" tag scroll vertically through the level 3 options:
• ASC - (associations)
• APb - (anti-pass back)
• Ltd - (Limited use counters)
•OLA - (Off-Line Access)
• "---" or (Exit back to previous level)
6.4. Once a specific menu item in level 3 is decided upon, the display is moved, horizontally, from
level 3 to level 4 by presenting and holding the "Admin" tag for 5 seconds. E.g. if "ASC" is
displayed and the "Admin" tag is presented and held for 5 seconds then the display changes
from "ASC" to "CH.1"
6.5. The various options presented in level 4 depend on what is selected in level 3. For example:
6.5.1. If "ASC" is selected then channel 1 or 2 is first chosen by scrolling vertically through:
• Ch.1 - (Relay on Channel 1 selected)
• Ch.2 - (Relay on Channel 2 selected)
• "---" - (if exit to a previous level is required) (The selection is made by presenting and
removing the "Admin" tag for 5 seconds. E.g. if "ASC" is displayed and the
"Admin" tag is presented and held for 5 seconds, then the display changes from
"ASC" to "CH.1")
6.5.2. If "APb" is selected then an anti-pass back level L.01 to L.07 is first chosen by scrolling
vertically through the levels
• L.01 - (Level 1)
• L.02 - (Level 2)
• L.03 - (Level 3)
• L.04 - (Level 4)
• L.05 - (Level 5)
• L.06 - (Level 6)
• L.07 - (Level 7)
• "---" - (if exit to a previous menu is required). (The selection in 6 is made by
presenting and removing the "Admin" tag. The resultant choice is selected by
presenting and holding the "Admin" tag for 5 seconds.)
6.5.3. If "Ltd" is selected then a limited use counter C.01 to C.04 is first chosen by scrolling
vertically through the list vertically through the levels
• C.01 - (Counter 1)
• C.02 - (Counter 2)
• C.03 - (Counter 3)
• C.04 - (Counter 4)
• "---" - (if exit to a previous menu is required). (The selection in 6 is made by
presenting and removing the "Admin" tag. The resultant choice is selected by
presenting and holding the "Admin" tag for 5 seconds.)
6.5.4. If "OLA" is selected (applies only to a RSH) then one of the options
• No - (means that the head will NOT allow a tag to operate at the RSH when the head is off
line (i.e. not linked via the RS485 network.)
• YEs - (specifies that the head will permit valid tags to operate, even off-line)
NOTE: The OLA menu will only appear for
R S H 's. It does not apply to the L1000.
Page 60