Operating Procedures; Serial Number Location; Before Initial Use - Cushman Refresher fs2 Owner's Manual

OPERATING PROCEDURES

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
OPERATING PROCEDURES

SERIAL NUMBER LOCATION

Three serial number and manufacture date code labels are on the vehicle. PARTS A and B are on the crossmember sec-
tion of the chassis on the driver side. PART C is below the driver's seat. PART D is on the rear frame cross tube.
Design changes occur continuously. When you order service parts, the PIN number, manufacture date code or serial
number must be available.
Serial Number
Labels
Number
Part B Label No.
Part A
abels
V
Part C
Part D
Serial Number Location

BEFORE INITIAL USE

Read, understand and follow the safety label on the instrument panel. Make sure you understand how to safely operate
the vehicle and equipment before driving.
To prevent battery explosion, keep all flammable materials, open flame or sparks away from the
battery.
17
Owner's Guide