Table of Contents
Advertisement
OPERATING PROCEDURES
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
B
Passenger side countertop must be removed and module clamps released prior to removal of any module.
Dimple Boss - located on the bottom
of each module for positioning.
1.
6"Cup Module: The 6" cup module is positioned by
four dimple extrusions located on the bottom of the
module. To remove these modules, remove the pas-
senger side countertop and loosen module clamps,
(refer to lockdown mechanism). Gently pull the module
up and out using the door handle and or top end of
module.
28
No tools are needed for module removable and installation.
NO TOOLS REQUIRED
Modules can be arranged in any order
to make different combinations
of the 6" cup, 12", 18" or 6" pull through modules
Owner's Guide
up to total of 24" wide.
Module Clamp
6" Cup Module
12" - 18" Center Module
6" Pull Through Module
Wire cup racks
are designed to
hold cups only.
Advertisement
Table of Contents
