Table of Contents
Advertisement
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
REFRESHMENT UNIT OPERATION – FS2
Lock-Down Mechanism
1.
Countertop: The passenger side countertop is removable for module replacement. To remove, lift the countertop up
and remove from the hinge support. Removing the countertop allows the modules to slide out after releasing the
module clamps (see next section for module clamp operation).
2.
Module Clamps: The modules are secured by module clamps that place a downward force on the modules.
Release and raise the clamp by turning the large nut left. Raise the clamp high enough so the module can be pulled
up and out of placement. The clamp must be released on BOTH sides of module.
Module Removal and Installation – FS2
Turn nut left to release
clamp force on
both sides of modules.
The countertop and all modules must be correctly installed before operating the vehicle.
OPERATING PROCEDURES
Lift up passenger
side countertop
and remove.
Owner's Guide
Countertop off
Module clamp lifts up
B
27
Advertisement
Table of Contents
