Operating Procedures; Serial Number Location; Before Initial Use - Cushman Hauler 800XE Owner's Manual

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

SERIAL NUMBER LOCATION

The vehicle has two serial number and manufacture date code plates. PART C label is found on the body panel below the
driver seat. PART D is found on the frame tube below the floorboard. The other (PARTS A and B) is found on the frame
crossmember below the front seat. Lift the seat and the flap to access PARTS A and B
Design changes occur continuously. When you order service parts, the PIN number, manufacture date code or serial
number must be available.
Part A and B
Serial Number
Part D

BEFORE INITIAL USE

Read, understand and follow the safety label on the instrument panel. Make sure you understand how to safely operate
the vehicle and its equipment.
Reckless use of this vehicle can cause severe injury or death. This vehicle is a light-duty vehicle,
Do not engage in rough or reckless operation of this vehicle.
If you do not know the terrain, make sure you prepare for unexpected occurrences. If the vehicle
gets stuck or the batteries discharge, a one-hour drive can take many hours on foot.
Explosive hydrogen gas is created during the charge cycle of batteries. Do not charge bat-
teries without enough ventilation. A 4% concentration of hydrogen gas is explosive.
To prevent battery explosion, keep all flammable materials, open flame or sparks away from the

OPERATING PROCEDURES

Lift Flap on Access Panel
Labels
Part C
NOT an All Terrain Vehicle (ATV).
OPERATING PROCEDURES
batteries.
Owner's Guide
Label No.
V
15