Fuel; Fuel Tank; Early Production Fuel Tank - Cushman Refresher fs2 Owner's Manual

Hide thumbs Also See for Refresher fs2:
Table of Contents

Advertisement

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

FUEL

To decrease the risk of severe injury or death from improper fuel handling:
Do not add fuel near open flame or electrical items that can cause a spark.
Always wear eye protection to protect against splashed fuel and fuel vapors.
Inspect the fuel cap, tank and other components for leaks or damage that can cause a hazardous
Oxygenated or reformulated gasoline, is mixed with alcohols or ethers. Excessive amounts of these blends
can damage the fuel system or cause performance problems. If any operating problems occur, use gasoline
Use clean regular grade unleaded fuel. The Ethanol blend fuel up to 10% is permitted.
Do not use gasoline that contains methanol.
High altitude or heavy use/load applications can benefit from higher octane gasoline.

FUEL TANK

The fuel tank is found below the seat on the passenger side of the vehicle. Fill the tank with clean, automotive grade gas-
oline.

Early Production Fuel Tank

Always allow enough space for the expansion of gasoline. Leave at least 1-inch (2.5 cm) of space
Early production fuel tanks can be identified by the location of
the fuel cap which is located in the middle of the top of the
tank as shown.
Early production fuel tanks require enough space for the
expansion of the gasoline. Leave at least 1-inch (2.5 cm) of
space below the bottom of the filler neck.
Do not smoke near the fuel tank.
Always handle gasoline in a well ventilated area.
condition.
with a lower percentage of alcohol or ether.
below bottom of filler neck.
Owner's Guide
OPERATING PROCEDURES
Early Production Fuel Tank
B
Fuel
1" Min.
(2.5 cm)
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Refresher oasisRefresher fsf

Table of Contents