4.
Install the microprocessor:
a.
Touch the static-protective bag containing the new microprocessor to any
unpainted metal surface on the server; then, remove the microprocessor from
the package.
b. Hold the microprocessor by the open latches, and center the microprocessor
over the microprocessor connector.
Attention: Make sure that the microprocessor is oriented and aligned
correctly before you try to close the latches.
c.
Carefully close the latches to seat the microprocessor in the connector.
Terminator card
Latch
Microprocessor
Latch
Chapter 5. Installing options
57