IBM eserver xSeries 350 User Reference Manual page 65

2. Remove the memory-board assembly:
a. Lift up on the memory board assembly and remove it from the server.
b. Place the memory-board assembly on a static-protective surface, such as the
static-protective package in which an option comes.
3. Locate the DIMM connectors on the memory board. Determine the DIMM
connectors into which you will install the DIMMs. (See the notes at the beginning
of this procedure.)
4. Touch the static-protective bag that contains the DIMM option to any unpainted
metal surface on the server. Then, remove the DIMM from the package.
Attention: To avoid breaking the retaining clips or damaging the DIMM
connectors, handle the clips gently
5. Turn the DIMM so that the DIMM keys align correctly with the connector.
6. Insert the DIMM by pressing the DIMM straight into the connector. Be sure that
the retaining clips snap into the closed positions.
Memory board
Chapter 5. Installing options
53