Table of Contents
Advertisement
5. PRINTER SETUP
5.9 PARAMETER SETTING IN MENU MODE
5.9.1 CATEGORY "FIRMWARE VERSION, CRC"
This category indicates Version Nnumber and CRC of Firmware. Not changeable in this category.
Function
Main Firmware
FTP Firmware
Boot Firmware
SBCS CG
5.9.2 CATEGORY "COMMUNICATION INTERFACE"
User can select communication interface function menu in this category.
(*: Default setting of the function)
Function
Interface Type
Printer IP Addr.
Gate IP Addr.
Subnet Mask
Socket Port
Mac Address
Display the version number and CRC of the installed main firmware on
the second line of the LCD as below.
vvvvv: 5 digits for the version number
cccc: 4 digits for CRC
Display the version number and CRC of the installed FTP firmware on
the second line of the LCD as below.
vvvvv: 5 digits for the version number
cccc:
4 digits for CRC
Display the version number and CRC of the installed boot firmware on
the second line of the LCD as below.
vvvvv: 5 digits for the version number
cccc:
4 digits for CRC
Display the version number and CRC of the installed SBCS CG on the
second line of the LCD as below.
vvvvv: 5 digits for the version number
cccc:
4 digits for CRC
List of Menu
USB*
Ethernet
Parallel
XXX.XXX.XXX.XXX
XXX: No.000-255
XXX.XXX.XXX.XXX
XXX: No.000-255
XXX.XXX.XXX.XXX
XXX: No.000-255
XXXX
XXXX: No.
-
E5-25
5.9 Parameter Setting In Menu Mode
Description
Description
Select the interface type.
Note) If Parallel option is not installed,
"Parallel" is not displayed.
Set the printer IP address for Ethernet.
This setting is valid, if Ethernet is selected
for Interface Type.
Set the gate IP address for Ethernet. This
setting is valid, if Ethernet is selected for
Interface Type.
Set the subnet mask for Ethernet. This
setting is valid, if Ethernet is selected for
Interface Type.
Set the socket port for Ethernet. This
setting is valid, if Ethernet is selected for
Interface Type.
Display the Mac address on the
second line of the LCD.
ENGLISH VERSION
Hide quick links:
Advertisement
Table of Contents
