Configuration Print - Toshiba DB-EA4D SERIES Owner's Manual

4. BASIC FUNCTIONS OF OPERATION PANEL

4.3.1 CONFIGURATION PRINT

Configuration Print Mode performs list printing of settings in Menu Mode.
It is premised on use of more than 58mm width size paper in this mode.
Sequence:
1. Press and hold [FEED] Key, then turn the printer on.
All I/F are in BUSY state during this mode.
And a message appears on the LCD, as shown below.
Print Config.
Press FEED Key
2. Press [FEED] Key shortly, it enters Configuration Print Mode and print printer configuration in
the same time.
Printer Config.
Printing...
3. A message appears on the LCD, As shown below
Printer Config.
Completed
4. Press [FEED] Key shortly or long.
After reset printer, a message appears on the LCD, as shown below.
READY
NOTE:
1. If Cut Sheet mode is selected as the paper type, can not perform configuration print.
Please change paper type and try again.
2. All keys are invalid during printing printer configuration.
E4-5
ENGLISH VERSION
4.3 Special Functions