Toshiba DB-EA4D SERIES Owner's Manual page 60

5. PRINTER SETUP
1. Rolling ASCII print test
This mode performs rolling ASCII print test repeat, and page number is printed on the top left corner of
the page.
The print result as follows.
Page number
00000001
!!"#$%&'()*+,-./01234･･･････････････････････
!"#$%&'()*+,-./012345･･･････････････････････
"#$%&'()*+,-./0123456･･･････････････････････
If the setting of paper type is Black Mark Mode, the paper is cut at the next Black Mark (w/ Cutter) or
fed to the next Black Mark to cut at manual cut position (w/o Cutter). If the paper type is Document
Length Mode, the paper is cut at the end of the page (w/ Cutter) or fed to the end of the page to cut at
manual cut position (w/o Cutter). If the paper type is Label Mode, the paper is cut at the next gap (w/
Cutter) or fed to the next gap to cut at manual cut position (w/o Cutter).
The following settings of Menu Mode are valid in Rolling ASCII print test.
Paper Type, Form Length, Paper Width, Paper Density, Power Control, Maximum Speed, Page
Recovery (only Online mode), BM Cut Offset, Label Cut Offset, Top Margin, Label Top Margin,
BM Cut Position and Label Cut Pos, Paper Load.
2. H print test
This mode performs rolling H print test repeat, and page number is printed on the top left corner of the
page.
The print result as follows.
Page number
00000001
HHHHHHHHHHHHHHHHHHHH････････････････････････
HHHHHHHHHHHHHHHHHHHH････････････････････････
If the setting of paper type is Black Mark Mode, the paper is cut at the next Black Mark (w/ Cutter) or
fed to the next Black Mark to cut at manual cut position (w/o Cutter). If the paper type is Document
Length Mode, the paper is cut at the end of the page (w/ Cutter) or fed to the end of the page to cut at
manual cut position (w/o Cutter). If the paper type is Label Mode, the paper is cut at the next gap (w/
Cutter) or fed to the next gap to cut at manual cut position (w/o Cutter).
Depends on a paper width
(Paper Width function setting in Menu Mode.)
Depends on a paper width
(Paper Width function setting in Menu Mode.)
6lpi
6lpi
E5-32
ENGLISH VERSION
5.9 Parameter Setting In Menu Mode
Depends on
Document Length or
Label Length Setting
Depends on
Document Length or
Label Length Setting