Feed Key - Toshiba DB-EA4D SERIES Owner's Manual

4. BASIC FUNCTIONS OF OPERATION PANEL

4.2.3 FEED KEY

This key feeds or loads paper.
This key is not activated during the printer is in an ERROR state and processing mechanical activities.
 Press [FEED] Key when Document Length Mode is selected and paper is loaded, the printer
feeds paper.
 Press [FEED] Key when Label Mode is selected and paper is loaded,
When Rotary cut is set to "OFF",
- If paper is present at TOF (stand by) position, Paper is fed to next Label TOF position.
- If paper is present at Manual cut position, Paper is fed to next Manual cut position.
- If paper is present at other position (e.g. just printing is done), Paper is fed to next
Manual cut position.
When Rotary cut is set to not "OFF",
- Paper is fed to Label TOF position.
 Press FEED Key when Black Mark Mode is selected and paper is loaded,
When Rotary cut is set to "OFF",
- If paper is present at TOF (stand by) position, Paper is fed to next BM TOF position.
- If paper is present at Manual cut position, Paper is fed to next Manual cut position.
- If paper is present at other position (e.g. just printing is done), Paper is fed to next
Manual cut position.
When Rotary cut is set to not "OFF",
- Paper is fed to BM TOF position.
 Press FEED Key when Perforation Mode is selected and paper is loaded,
When Rotary cut is set to "OFF",
- If paper is present at TOF (stand by) position, Paper is fed to next Perforation TOF
position.
- If paper is present at Manual cut position, Paper is fed to next Manual cut position.
- If paper is present at other position (e.g. just printing is done), Paper is fed to next
Manual cut position.
When Rotary cut is set to not "OFF",
- Paper is fed to Perforation TOF position.
 Press [FEED] Key when Cut Sheet Mode is selected and paper is loaded, the printer feeds paper
to eject.
 In case of Paper Load setting is Manual and no paper is set in the printer, press [FEED] Key
after paper is set manually and PE sensor detects paper. Then the printer loads paper to TOF
position in each mode.
 Press [FEED] Key when "PARK" is displayed on the LCD, the printer loads paper.
E4-3
ENGLISH VERSION
4.2 Keys On The Normal Mode