Toshiba DB-EA4D SERIES Owner's Manual page 56

5. PRINTER SETUP
5.9.3 CATEGORY "PRINTER CONFIGURATION"(Cont)
Function
Rotary Cutter
Head Fail Thresh
Print Printer Config.
List of Menu
Off*
Manual
Auto
0 - 10* - 50 - 100
-
E5-28
5.9 Parameter Setting In Menu Mode
Description
Select the Rotary Cutter option.
If "Manual" is selected, the printer
requires Cut command is sent. If Cut
command is sent, paper is cut at the end
of page.
If "Auto" is selected, the printer cuts
paper every at the end of page without
Cut command.
Cut position:
Label: between Gap (see 3.1.2)
BM: Black mark (see 3.2.2)
Document length: TOF (see 3.3.2)
Select the threshold to define "Thermal
Head Warning" or "Thermal Head
Error".
If "0" is selected, no warning message or
errors are indicated even though any
failure elements of thermal print head
are found at the time of Power ON the
printer.
If any number is selected except "0", the
number is used for the threshold to
define whether "Thermal Head
Warning" or "Thermal Head Error" is
indicated.
e.g. If "12" of failure elements of
thermal print head are found and "10" is
set as this parameter, "Thermal Head
Error" is indicated.
If "8" of failure elements of thermal
print head are found and "10" is set as
this parameter, "Thermal Head
Warning" is indicated.
Perform to print the current settings of
the printer configuration.
ENGLISH VERSION