Ethernet Interface Setting - Toshiba DB-EA4D SERIES Owner's Manual

5. PRINTER SETUP

5.5.2 ETHERNET INTERFACE SETTING

Sequence:
1. Select "Communication Interface" in main menu of Menu Mode.
And press [FEED] key shortly.
A message appears on the LCD, as shown below.
Interface Type
USB
2. Press [FEED] key shortly,
A message appears on the LCD, as shown below.
Interface Type
USB *
3. Select "Ethernet",
And press [FEED] key shortly.
A message appears on the LCD, as shown below.
A setting is re-stored in the printer.
Ethernet
Accepted
4. Press [FEED] key shortly.
A message appears on the LCD, as shown below
Interface Type
Ethernet
5. Select " Printer IP addr." in function menu of
Communication Interface.
And press [FEED] key shortly,
A message appears on the LCD, as shown below.
Printer IP Addr.
192.168.1.1
Blink slowly
6. Set IP address.
A message appears on the LCD,
as shown below
[MENU] key : Increase value
[PAUSE] key : Decrease value
[FEED] : Shift next address
XX.XX.XX.XX
Accepted
7. Press [FEED] key shortly.
A message appears on the LCD, as shown below
Printer IP Addr.
XX.XX.XX.XX
Default Setting
Firmware Version, CRC
Communication Interface
Printer Configuration
Printer Adjustment
Printer Test Modes
Sensor Calibration
Menu Mode Exit
Interface Type
Printer IP addr.
Subnet Mask
Default Gateway
Get IP Address
DHCP IP Address
Community (R)
Community (R/W)
IP Trap1
IP Trap1 Address
Trap1 Comm.Name
IP Trap2
IP Trap2 Address
Trap2 Comm.Name
MAC Addr.
Socket Port TCP
Socket Port UDP
Socket Port UDP2
Physical Layer
FTP User Name
Return to Prev. Layer
NOTE:
1. Press [MENU] key shortly,
it shifts the selection mode as
2. Press [PAUSE] key shortly,
it shifts the selection mode as
3. Press [FEED] key shortly,
Enter menu or save setting value
E5-9
ENGLISH VERSION
5.5 Interface Setting
Main Menu
①
Function Menu
②
③
④
⑤
arrow.
arrow.