Connecting The Power Cord And Cables; Power Switch - Toshiba DB-EA4D SERIES Owner's Manual

5. PRINTER SETUP

5.2 CONNECTING THE POWER CORD AND CABLES

Turn the POWER SWITCH to OFF before connecting the power cord or cables
Mettez l'interrupteur sur la position éteinte avant de brancher le cordon d'alimentation ou les câbles
NOTE:
To prevent radiation and reception of electrical noise, the interface cables must meed the following
requirements:
1. Fully shielded and fitted with metal or metalised connector housings.
2. Kept as short as possible.
3. Should not be bundled tightly with power cords.
4. Should not be tied to power line conduits.
The host computer must have either USB port, LAN port or Centronics parallel port. To communicate
with host computer, an USB cable, LAN cable or Centronics cable is required. (Refer to Appendix I for
more details.)

Power Switch

Power Cord
Power Switch
( － ): Power On
( O ): Power Off
WARNING!
AVERTISSEMENT!
E5-4
ENGLISH VERSION
5.2 Connecting The Power Cord And Cables
.
USB Interface
LAN Interface
Parallel
Interface
Power Switch