Pause Key - Toshiba DB-EA4D SERIES Owner's Manual

2st label printer
Hide thumbs Also See for DB-EA4D SERIES:
Table of Contents

Advertisement

4. BASIC FUNCTIONS OF OPERATION PANEL

4.2.2 PAUSE KEY

This key switches between READY/PAUSE states when the key is pressed alternately.
USB, Parallel and Ethernet interface are kept ready to host during READY or PAUSE state.
This key is not activated during the printer is in ERROR state.
 Press [PAUSE] Key during mechanical activities, the printer stops after printing and feeding the
page of data in buffer and then changes to PAUSE state.
 Press [PAUSE] Key in PAUSE state, it changes to READY state.
Ready and Busy
LED
POWER
ERROR
On
Off
On
Off
In "READY" state or three errors condition (LABEL ERROR / BM ERROR / PERFORATION
ERROR), if this key is pressed and hold more than 1 sec, loaded paper will be parked (unloaded) to the
paper parking position.
The message on the LCD is displayed "Parking . . ." during paper parking (unloading).
If paper parking is completed, the message on the LCD is displayed "PARK".
- In this state, if [FEED] key is pressed, paper is loaded and "READY" is displayed on the LCD.
If paper parking is not completed even if loaded paper is fed in reverse with max. 20", the same message
as previous is displayed on the LCD. ("READY")
- In this state, if [FEED] key is pressed, paper is loaded and "READY" is displayed on the LCD.
LCD
The printer is in READY state and No error.
USB, Parallel and Ethernet interface signal
READY
are ready to host.
Mechanical activities are valid.
The printer is in PAUSE state and No error.
USB, Parallel and Ethernet interface signal
PAUSE
are ready to host.
Stops and pauses mechanical activities.
E4-2
4.2 Keys On The Normal Mode
Condition
ENGLISH VERSION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents