Connecting The Power Cord - Toshiba B-850 Owner's Manual

2. PRINTER SETUP
2.5 Connecting the
Power Cord
CAUTION!
1. Make sure that the
printer power switch is
turned to the off
position before
connecting the power
cord to prevent
possible electric shock
or damage to the
printer.
2. Use only the power
cord supplied with the
printer. Use of any
other cord may cause
electric shock or fire.
3. Connect the power
cord to a three-prong
outlet only, with the
third prong being a
good ground (earth)
connection.
1. Make sure that the printer power switch is in the off position.
2. Connect the Power Cord to the printer as shown in the figure below.
Power Connector
3. Plug the other end of the Power Cord into a grounded outlet as
shown in the figure below.
Power Cord
2- 5
EO1-33029

2.5 Connecting the Power Cord

Power Switch