Displaying The Status Confirmation Screens - Sony POWER HD FX PDW-700 Operation Manual

2
Select one of ID-1 to ID-4, and press the
MENU knob.
A x mark appears over the first character
position in the string, and characters can now
be input.
017 SHOT ID
ID-1 :? x
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
3
Enter or change the shot ID.
When you are entering the whole shot ID, go
to 2.
1 Turn the MENU knob to move the
mark to the character which you want
to change, then press the MENU knob.
017 SHOT ID
ID-1 :? x
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
2 Turn the MENU knob until the
moves to the character position that
you want to select, then press the
MENU knob.
017 SHOT ID
ID-1 :?+
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
4
Repeat step 3 for each of the remaining
characters.
5
When the input is complete, turn the
MENU knob to move the
END, then press the MENU knob.
This ends the input, and returns to the
original SHOT ID page.
176 Setting the Status Display on the Viewfinder Screen and the LCD Monitor
To insert a space
In step 3 above, move the x mark over INS, and
press the MENU knob.
To cancel inserting a space, move the x mark
over RET, then press the MENU knob.
TOP
To delete a character
In step 3 of "Setting the shot ID" (page 175),
move the x mark over DEL, and press the
MENU knob.
This deletes the character under the x mark in the
ESC END
shot ID row.
To cancel deleting the character, move the x
mark over RET, and press the MENU knob.
To cancel changing shot ID
Before executing step 5 of "Setting the shot ID"
x
(page 175), move the b mark over ESC, then
press the MENU knob or flick the CANCEL/
PRST/ESCAPE switch to ESCAPE.
TOP
Displaying the status
confirmation screens
You can confirm the settings or status of the
camcorder on the LCDs by displaying the
ESC END
following four screen.
x mark ABNORMAL <!> screen
This window allows you to confirm why the !
(warning) indicator lights in the viewfinder.
You can use the '!' LED page of the
OPERATION menu to set whether or not the !
TOP
(warning) indicator lights.
SYSTEM screen
This screen displays information such as the
system frequency, the recording format, whether
output from the TEST OUT connector is on or
off, and the type of output signal.
ESC END
FUNCTION screen
This screen displays the functions assigned to the
ASSIGN switches, the detection level, and other
information.
AUDIO STATUS screen
mark over This screen allows you to confirm the following
x
items related to audio.
• Audio bit rate
• Setting condition of DF/NDF
• Type of front microphone