Displaying The Status Confirmation Screens - Sony HDW-650 Operation Manual

018 SHOT ID
ID-1 :? x
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
3
Enter or change the shot ID.
When you are entering the whole shot ID, go
to 2.
1 Turn the MENU knob to move the
mark to the character which you want
to change, then press the MENU knob.
018 SHOT ID
ID-1 :? x
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
2 Turn the MENU knob until the
moves to the character position that
you want to select, then press the
MENU knob.
018 SHOT ID
ID-1 :?+
ID-2 : ssssssssssss
ID-3 : ssssssssssss
ID-4 : ssssssssssss
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[ ]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET
4
Repeat step 3 for each of the remaining
characters.
5
When the input is complete, turn the
MENU knob to move the
END, then press the MENU knob.
This ends the input, and returns to the
original SHOT ID page.
To insert a space
In step 3 above, move the x mark over INS, and
press the MENU knob.
To cancel inserting a space, move the x mark
over RET, then press the MENU knob.
TOP
ESC END
x
TOP
ESC END
mark
x
TOP
ESC END
x mark over
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
To delete a character
In step 3 of "Setting the shot ID" (see page 128),
move the x mark over DEL, and press the
MENU knob.
This deletes the character under the x mark in the
shot ID row.
To cancel deleting the character, move the x
mark over RET, and press the MENU knob.
To cancel changing shot ID
Before executing step 5 of "Setting the shot ID"
(see page 128), move the b mark over ESC, then
press the MENU knob or flick the CANCEL/
PRST/ESCAPE switch to ESCAPE.
Displaying the status
confirmation screens
You can confirm the settings or status of the
camcorder on the LCDs by displaying the
following four screen.
ABNORMAL <!> screen
This window allows you to confirm why the !
(warning) indicator lights in the viewfinder.
You can use the "!" LED page of the
OPERATION menu to set whether or not the !
(warning) indicator lights.
SYSTEM screen
This screen displays information such as the
system format and the type of input or output
signal.
FUNCTION screen
This screen displays the functions assigned to the
assignable switches, ON or OFF of ZEBRA, the
detection level, and other information.
AUDIO STATUS screen
This screen allows you to confirm the following
items related to audio.
• Setting condition of audio
• Setting condition of DF/NDF
• Type of front microphone
• Type of input signal to audio channels 1 to 4
• Input level of audio channels 1 to 4
You can use the SET STATUS page of the
OPERATION menu to set whether or not the
status confirmation screens are displayed.
129