Installing The Upper Case - Yamaha F60A Supplementary Service Manual

7. Tighten the oil pan bolts 7 then exhaust
manifold bolts 8, and then tighten them
to the specified torque.
Exhaust manifold bolt 8:
10 N·m (1.0 kgf·m, 7.2 ft·lb)
8. Install the plate 9 and the muffler 0 to
the oil pan.
9. Install the muffler assembly A by insert-
ing the tip of the water pipe 4 into the
joint hole a of the upper case.
69W3D1X
LT LT
572 572
S69W7100
10. Tighten the upper case bolts B, and then
tighten them to the specified torque.
Upper case bolt B:
21 N·m (2.1 kgf·m, 15 ft·lb)

Installing the upper case

1. Install the upper mount 1 and bolts 2
into the upper case.
2. Install the lower mounts 3 and bolts 4
into the upper case.
3. Install the mount covers 5.
Upper case
72