Assembling The Upper Case; Installing The Upper Case - Yamaha F80BETL Service Manual

BRKT

Assembling the upper case

1. Install the drive shaft bushing into the
upper case, and then install the circlip.
1
WR-No.2
Needle bearing attachment 1:
90890-06653
Driver rod L3 2: 90890-06652
2. Install the muffler assembly 3 by insert-
ing the tip of the water pipe 4 into the
joint hole a of the upper case.
3. Install the muffler assembly bolts 5, and
then tighten them to the specified torque.
LT LT
A A
271
4
a
Muffler assembly bolt 5:
20 N·m (2.0 kgf·m, 14.8 ft·lb)

Installing the upper case

1. Install the upper mount 1 and bolts 2
into the upper case.
7-15
Bracket unit
2
S6D97050
5
LT LT
572 572
A A
3
4
A
S6D87190
2. Install the bolts 3, and then tighten them
to the specified torque.
3
LT LT
572 572
Upper mount bolt 3:
28 N·m (2.8 kgf·m, 20.7 ft·lb)
3. Install the lower mounts 4 onto the
upper case.
4
4. Install the upper and lower mounting
bolts into the bracket 5 simultaneously.
5. Install the upper mounting nut 6 and
lower mounting nut 7, and then tighten
them to the specified torques.
NOTE:
Before tightening the lower mounting nut, be
sure to connect the ground lead to the lower
mounting bolt.
6. Install the mount covers 8.
2
A
1
S6D87590
A
S6D87200
6D93G11