Disassembling The Oil Pan; Assembling The Oil Pan - Yamaha F60A Supplementary Service Manual

BRKT

Disassembling the oil pan

1. Remove the muffler 1, plate 2, and
exhaust manifold 3 from the oil pan 4.
2. Remove the oil pan 4 and the exhaust
guide 5.
3. Remove the oil strainer 6 and the relief
valve housing 7.

Assembling the oil pan

1. Install the gaskets onto the exhaust
guide 1.
2. Install the relief valve assembly 2 by
installing the bolts, then tightening them
finger tight.
71
Bracket unit
3. Install the oil strainer 3 by installing the
bolts.
4. Install the water pipe 4.
5. Install the oil pan 5 and bolts, and then
tighten the bolts finger tight.
6. Install the exhaust manifold 6 and bolts,
and then tighten the bolts finger tight.
69W3D1X