BRKT
3. Install new oil seals into the oil seal hous-
ing.
2
4
Needle bearing attachment 4:
90890-06612
Driver rod LS 2: 90890-06606
4. Install new o-rings and the gasket, and
then tighten the screws to the specified
torque.
E
WR-No.2
E
Oil pump cover screw:
4 N·m (0.4 kgf·m, 3.0 ft·lb)
Disassembling the upper case
1. Remove the muffler assembly from the
upper case.
2. Remove the circlip, then the drive shaft
bushing.
7-13
Bracket unit
S6D97030
WR-No.2
WR-No.2
E
S6D97040
Ball bearing attachment 1:
90890-06638
Driver rod LL 2: 90890-06605
Checking the drive shaft bushing
1. Check the drive shaft bushing for wear or
cracks. Replace if necessary.
Disassembling the oil pan
1. Remove the muffler 1 and plate 2 from
the oil pan 3.
2. Remove the exhaust manifold 4 from
the oil pan 3.
3. Remove the oil pan 3 from the exhaust
guide 5.
4. Remove the oil strainer 6.
6
3
4
2
1
S6D87140
5
2
1
S6D87540
6D93G11