Table of Contents
Advertisement
Separated channel encode settings
21.2
Follow steps below to encode separated channels:
1.
Local operation,【Main Menu】>【System】>【Encode】（or
alternatively right click on the window for the remote setting and then
choose 'Device Config' at 【System】>【Encode】）.
2.
Select channel one, set resolution to D1, frame rate at 20, byte rate value
1024.
3.
Select channel two, set resolution to CIF, frame rate by 25, byte rate value
512. Right click once on it or select 'Advanced', and click copy.
4.
Select channel three and either right click once on it or choose the
'Advanced' option, select paste. To make it the same as channel four.
Note: video resolution network data transfer requirement speeds:
Video Encode
D1
HD1
CIF
QCIF
1080P
When using the Video/Audio tick boxes at the bottom of the options list, the video
tick box will automatically highlight when you tick the audio tick box. Audio is
optional depending on the camera connected to the iDVR. Video signal is always
streamed and recorded.
Extra stream config:
Extra stream is used for client side and mobile device monitoring (using mobile
apps). In order to allow for remote mobile device monitoring, enable the 'Extra
stream' by clicking on the drop down tab at the top of the second column then
configure the frame rate, code stream value, the setting way in the same method
that was used to setup the separated channel parameter (see 14.2).
© Copyright QVIS® All documentation rights reserved.
Required bit rate
512~2560kbps
384~2048kbps
64~1024kbps
64~512kbps
1024~8196kbps
76
Hide quick links:
Advertisement
Table of Contents
