Qvis Pioneer-4 User Manual page 26

17.2. Motion Detect
Motion Detect
Motion detection setup:
Within this configuration menu you are given setup options to activate a number of
elements of the motion detection feature. This includes setting up the alarm trigger,
linkage record and also to instruct a PTZ camera to move to a preset position for
when the motion sensor has detected movement (between certain periods of time).
To set these options:
Choose【Main Menu】>【Alarm】>【Motion Detect】, then enter the setup
interface;
Choose the camera channel you want to set and adjust the sensitivity level. You
will also be able to adjust the time period of alarm surveillance. Set the monitor
area (click the 'Set' button next to 'Region'), select the areas you want, the 'Default'
setting will make all areas motion sensitive, then right click to choose 'Up window'.
In the second section of the motion detect options, you can customise:
25
© Copyright QVIS® All documentation rights reserved.