Qvis Pioneer-4 User Manual page 27

What period you would like the motion detect to be active
- Specify the length of the alarm trigger delay
- Set an interval period length between alarm activations
- Which channels to set motion detection upon
- Tour channel setup
- PTZ activation time period setup (with activation delay option)
- Which channels to allow snapshots from the footage
- Whether you want an alert message to be displayed,
- Sending an email notification to alert you of the triggered motion sensor
alarm (need
- to set email parameters at net service)
- Activating the buzzer (local buzzer).
- To upload trigger data through the FTP
Set other channels alarm parameter following step 2 and step 3.
Note: Video blind, video loss and alarm input's setup method are similar with
motion detection.
Motion detection menu options:

【Channel】Choose the set motion detect channel.

【Enable】■ means that the motion detect function is on.

【Sensitivity】 You have six sensitivity levels to choose from: Lowest,
Lower, Middle, High, Higher, and Highest..

【Region】Click [set] to enter the set area. The area is divided into
PAL22X18. Red blocks represent the motion detect defensive area. White
block means the unfenced area. You can set the area as followed, Drag
the mouse and draw the area. Default: all selected blocks are the
detection area.
© Copyright QVIS® All documentation rights reserved.
Select Region
26