Qvis Pioneer-4 User Manual page 29


【Delay】When alarm is over, recording will last some
seconds(10~300sec),then stop.

【Show message】Pop the alarm information dialog box in the local host
computer screen.

【Send EMAIL】■ means sending an email to user when the alarm is
turned on.
Note: Set in the [NetService] and send email.

【FTP upload】to tick it, the video & picture of related record channel &
snapshot channel will be uploaded to assigned position.
Note：FTP upload need be set at [Netservice]

【Buzz】When alarm is triggered, the device will emit a buzzing sound.
Abnormality
17.3.
The DVR's operating system will constantly scan the current software and
hardware of the device for any abnormal events such as:

No Disk (No hard disc drive available)

Disk Error

No Disk Space

Network Disconnection

IP Conflict (IP address is incorrect for remote connection)
If one of these system errors occurs the device will alert you with such as show
message and buzzer.
© Copyright QVIS® All documentation rights reserved.
PTZ Activation under hybrid mode
28