Qvis Pioneer-4 User Manual page 75

CAM3
Basic remote control operation
The control interfaces shown in Pic 9 have a number of functions that are described
below:

Screen Split: To choose the mode of preview

Playback: Enter playback area, can support multi-channel playback at the
same time.

Log: Show with log information

Local config: To set device alarm, enable to linkage function on the
remote network client side.

Channel control: Open the video, choose the video on the left video
window and then choose channel on the right, double click it to open the
first video, choose another one channel, double click to open the second
video, use the same way to open other channels. If the channel did not
change, system will closed previous video and open the new one you
choose.
Note: User can choose the most appropriate image mode, when opening remote
video control.
© Copyright QVIS® All documentation rights reserved.
CAM4
WEB interface
74