Qvis Pioneer-4 User Manual page 50

【Alarm center】
When the alarm has been triggered, you can send report alarm information to the
alarm server.

【Protocol type】GENERAL

【Enable】To tick it means enable.

【Server IP】IP address of Alarm Server

【Port】Device Port No.

【Alarm Report】Tick it means to report alarm information to server.

【Log Report】Tick it, means to report log to server.

【Wireless Config】
ADSL through 3G net card, use CMS to visit and config the device
© Copyright QVIS® All documentation rights reserved.
Alarm server setting
49