Qvis Pioneer-4 User Manual page 13

System
configuration
© Copyright QVIS® All documentation rights reserved.
Set alarm input channel, equipment type,
linkage
Alarm section,
input recording, screen shot , PTZ, patrol, buzz,
email and FTP upload
Set alarm mode: configuration, manual,
Alarm output shut down.
No HDD, HDD error, HDD capacity is not
Exception
enough, network cut, IP Conflict, linkage
handling
parameters, screen hint or buzz alarm.
Set algorithm rule: trajectory display,
sensitivity, minimum pixel, alert mode，and
Intelligent
setting linkage parameters: period, alarm
analysis
output, screen prompt, record, PTZ, tour,
buzzer, EMAIL, FTP upload.
Set system time, data format, language,
General hard disk full time operation, machine
configuration number,
summertime, stay time
Set main (extra) coding parameter: code
mode, resolving ability, frame rate, code
Encode
stream control, image quality type, code
configuration
stream value, frame between value,
video/audio enable.
Set basic network parameters, DHCP and
Network
DNS parameters, network high speed
configuration
download
parameters: defending
alarm output, screen
video format, output
time
hint,
mode,
12