Qvis Pioneer-4 User Manual page 33

[ Main Menu] > [Alarm] > [Intelligent Analysis], enter video analysis
I.
setting interface, enable this function.
Click 'Rule' to enter the rule setting interface, see pic 8:
1.
Enable 'Show traces' function, adjust the level of sensitivity and minimum
2.
image distance. The 'Alert way' section will allow you define what type of alarm
triggers the system analyses.
3. Once you have set your rules, you need to set the picket mode, choose picket
line or picket area. Click setting to enter the config interface, then right click the
mouse and choose 'Add'. Use the mouse to set two or more points and
connect them to form a line or an irregular area. After that has been set an
option box of forbidden direction will appear, choose one option and right click
mouse, then click yes return to pre-interface, click yes to finally finish alarm
rules setting.
4. Next you need to set the alarm control period steps. The taken linkage
measures are the same as step 2 and step 3 in 'Alarm setting' 10.1.
© Copyright QVIS® All documentation rights reserved.
Rule setting
32