Qvis Pioneer-4 User Manual page 53

【WIFI】
The DVR connects to wireless router via WIFI module then it visits it through the IP
address, the precondition of using this function is to make sure the DVR have
connected with WIFI modern.
WIFI configure
【Search】：click【search】to search all the available wireless device in current
range.
【enable】：tick it to enable firstly, then go for further setting.
【auto obtain IP address】：tick it to enable, device will auto obtain a WIFI IP.
【SSID】：wireless LAN name, auto match to the wireless device u connected.
【Password】：wireless network password of router；
【IP address】: to set the IP address of device, default is 192.168.1.12
【subnet mask】:set subnet mask of device, default is 255.255.255.0
【gateway】：set gateway of device, default is 192.168.1.1
52
© Copyright QVIS® All documentation rights reserved.