Qvis Pioneer-4 User Manual page 74

3. Connect with device, open browser, input the IP address of device, for
example, the IP is 10.2.2.88, then input http://10.2.2.88 at the address
column, will enter below page:
4. Log in by inputting your user name and password. If you choose to link
with all the videos after login, you need to choose the network stream.
LAN networks use the main stream to transfer, whilst WAN networks use
the extra stream to
5. transfer. If network bit rate is poor, what may improve video transfer rate
will be to choose an extra stream. The default administration login user
name is 'admin', there is no password to enter (leave blank). User should
create a password for the admin user profile after login. 'Pic 9' is the
interface view you will encounter after successfully logging in.
CAM1
© Copyright QVIS® All documentation rights reserved.
WEB login interface
CAM2
73