Qvis Pioneer-4 User Manual page 46


SMTP server: Email server address. It could be an IP address or domain
name. Domain name can be translated only it is the correct DNS
configuration.

Port: Email server port number.

SSL: Decide whether using Secure Socket Layer protocol to login.

User Name: Apply the email server user name.

Password: Input the password corresponding to the user.

Sender: Set the email sender address.

Receiver: Send the email to appointed receivers when the alarm is turned
on. You can set three receivers at most.

Title: You can set as you wish.
【IP Filter setup】
When choosing the white list, only the listed IP address can connect to the DVR.
The 64 IP addressed are supportive in the list.
When choosing the black list, the listed IP address cannot connect to the DVR. The
64 IP addressed are supportive in the list.
You can delete the set IP address by √ in the options.
Note：When the same IP address is in the white and black list at the same time,
the black list precedence is higher.
© Copyright QVIS® All documentation rights reserved.
EMAIL
45