Maintenance Mode Item List - Kyocera KM-1620 Service Manual

2C9-3

(2) Maintenance mode item list

Item
Section
No.
General U000 Outputting an own-status report
U001 Exiting the maintenance mode
U004 Checking the machine number
U005 Copying without paper
U019 Displaying the ROM version
Initialization U020 Initializing all data
U021 Initializing memories
Drive, paper U030 Checking motor operation
feed and paper
U031 Checking switches for paper conveying
conveying
U032 Checking clutch or solenoid operation
system
U034 Setting paper timing
U035 Setting folio size
U051 Adjusting the amount of slack in the paper
U053 Performing fine adjustment of the motor speed
U060 Adjusting the scanner input properties
Optical
U061 Turning the exposure lamp on
U063 Adjusting the shading position
U065 Adjusting the scanner magnification
U066 Adjusting the leading edge registration for scanning an original on the
U067 Adjusting the center line for scanning an original on the contact glass
U068 Adjusting the scanning position for originals from the DP
U070 Adjusting the DP magnification
U071 Adjusting the DP scanning timing
U072 Adjusting the DP center line
U073 Checking scanner operation
U074 Adjusting the DP input light luminosity
U087 Turning the DP scanning position adjust mode on/off
U088 Setting the input filter (moiré reduction mode)
U089 Outputting a MIP-PG pattern
U091 Checking shading
U092 Adjusting the scanner automatically
U093 Setting the exposure density gradient
U099 Checking the original size detection
* Initial setting for executing maintenance item U020
1-4-2
Maintenance item contents
• Adjusting the leading edge registration
• Adjusting the center line
• Length
• Width
• Drive motor speed adjustment
• Polygon motor speed adjustment
• Exit motor speed adjustment
• Registration motor speed adjustment
• Motor speed adjustment (for paper feed from bypass tray)
• Motor speed adjustment (for paper feed from optional paper feeder)
• Motor speed adjustment (in duplex mode)
• Main scanning direction
• auxiliary scanning direction
contact glass
• Adjusting leading edge registration
• Adjusting trailing edge registration
• Text/text and photo/photo mode
Initial
setting*
—
—
—
—
—
—
—
—
—
—
5.1/0/0/0/0/0
-1.2/0/0/0/0/0
330
210
20/0/70/80/80/0
0
0
0
0
0
0
0
12
—
0
0
–12
10
0
0
0
0
0
0
—
1
35
Off
—
—
—
0/0/0
—