Adjusting The Scanner Leading Edge Registration - Kyocera KM-1620 Service Manual

2C9

(8) Adjusting the scanner leading edge registration

Perform the following adjustment if there is regular error between the leading edges of the copy image and original.
U034
U066
(P. 1-6-12)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "066" using the numeric keys.
Press the interrupt key.
Place an original and press
the start key to make a test copy.
leading edge registration
Press the stop/clear key to
exit maintenance mode.
1-6-30
U071
(P. 1-4-14)
Start
Press the start key.
Is the scanner
correct?
Yes
End
Scanner leading edge registration
Original
Press the start key.
The new setting
is stored.
For copy example 1, decrease
the value using the zoom (–) key.
No
For copy example 2, increase
the value using the zoom (+) key.
Setting range : –32 – +32
Initial setting: 10
Changing the value by 1 moves
the leading edge by 0.17 mm.
Copy
Copy
example 2
example 1
Figure 1-6-58