Installation Environment - Kyocera KM-1620 Service Manual

2C9

1-2-3 Installation environment

1. Temperature: 10 - 32.5°C/50 - 90.5°F
2. Humidity: 15 - 80%RH
3. Power supply: 120 V AC, 11 A
220 - 240 V AC, 4.5 A (Average)
4. Power source frequency: 50 Hz ±0.3%/60 Hz ±0.3%
5. Installation location
• Avoid direct sunlight or bright lighting. Ensure that the photoconductor will not be exposed to direct sunlight or other
strong light when removing paper jams.
• Avoid extremes of temperature and humidity, abrupt ambient temperature changes, and hot or cold air directed onto
the machine.
• Avoid dust and vibration.
• Choose a surface capable of supporting the weight of the machine.
• Place the machine on a level surface (maximum allowance inclination: 1° ).
• Avoid air-borne substances that may adversely affect the machine or degrade the photoconductor, such as
mercury, acidic of alkaline vapors, inorganic gasses, NOx, SOx gases and chlorine-based organic solvents.
• Select a room with good ventilation.
6. Allow sufficient access for proper operation and maintenance of the machine.
Machine front: 1000 mm/39
Machine right: 300 mm/11
1-2-2
3
/ " Machine rear: 100 mm/3
8
13
/ " Machine left: 300 mm/11
16
d
a
Figure 1-2-1 Installation dimensions
15
/ "
16
13
/ "
16
f
c
1
a: 571 mm/22 / "
2
3
b: 552 mm/21 / "
4
3
c: 502 mm/19 / "
4
d: 1371.5 mm/54"
1
e: 1272 mm/50 / "
16
1
f: 952.5 mm/37 / "
2
b
e