Detaching And Refitting The Main Charger Unit - Kyocera KM-1620 Service Manual

(3) Detaching and refitting the main charger unit

Follow the procedure below to replace the main charger unit.
Procedure
1. Open the front cover.
2. While lifting the main charger unit toward the
upper right, remove the unit from the copier.
3. While pressing the main charger release
lever in the direction indicated by the arrow at
the removal stopper position to release the
removal stopper, remove the main charger
unit from the copier.
4. Replace the main charger unit and refit all the
removed parts.
Main charger
release lever
Main charger unit
Figure 1-6-64
2C9
1-6-35