Sync Card; Dsp Line Card; Sp661 Signal Processor; Madi I/O Dsp Line Card Cable - Euphonix SYSTEM 5 Installation Manual

Hide thumbs Also See for SYSTEM 5:

Table of Contents

Euphonix System 5 Installation Guide

Sync Card

AES Sync In (BNC): The DF66 SuperCore clocks to the signal at this port when the

sync source is set to AES Sync. Connect this port to a digital sync reference.

AES Sync In (3-pin Lemo Female): The DF66 SuperCore clocks to the signal at this

port when the sync source is set to AES Sync. Connect this port to a digital sync reference.

Word In (BNC): The DF66 clocks to the signal at this port when the sync source is set to

Word Clock. Connect this port to a digital sync reference.

Word Out (BNC): This signal is active regardless of selected sync source.

Bridge Card

Bridge Cards are used to connect (or bridge) multiple SP662 DSP Line Cards in a DF66.

They mount on top of the SP662 cards. The Bridge Card shown in Figure 3.2 is a 6x6 (for

bridging six SP662 cards). Other types of Bridge Cards are 2x2, 3x3, 4x4, and 5x5.

SP662 DSP Line Card

MADI In (4) and MADI Out (4) digital audio ins and outs on a Combination D (Combo

D) Subminiature connector. A MADI I/O DSP Line Card Cable connects to this Combo

D connector and transports the MADI I/O to eight BNC connectors. See the MADI

Hookup diagram (figure 2-9) and the MADI I/O DSP Line Card Cable diagram (figure

3-3) for details on these connections.

Figure 3-3

System 5 Components

Table of Contents