Exiting Setup - Printek FieldPro RT43 Series Operator's Manual

Appendix G – Control Panel Setup
Shortcuts
Exiting the Current Menu - When at any item within a menu, you may press and hold Paper Feed until it
beeps a second time to exit the current menu. If changes have been made, the printer will exit the current menu
and automatically advance to EXIT SETUP SAVE CHANGES. If no changes have been made, the printer
will return to the beginning of the current menu where you may re-enter the menu by pressing Power or
advance to the next menu by pressing Paper Feed.
Selecting the Factory Default Value - When at any item within a menu, you may press and hold the Power
Button until it beeps a second time to set the current item to its factory default value.

Exiting Setup

After you have finished making changes, press Paper Feed to proceed to either of the following exit menu
choices.
To save the changes you have made, press Power when the EXIT SETUP SAVE CHANGES Menu selection
appears.
To exit without saving changes, press Power when the EXIT SETUP DISCARD CHANGES Menu selection
appears, or at any time you may press and hold the Power Button until the printer beeps and turns off.
60