Printek FieldPro RT43 Series Operator's Manual page 53

DEVICE SETTINGS
Menu Item
Left Margin
Right Margin
Maximum Paper Speed
Form Feed Control
Form Feed Distance
Top of Form Adjust
Tear Adjust
Mark Sensitivity
Appendix A – Printer Configuration, Device Settings
ADVANCED
Menu Item
Left Paper Guide Adjust
Right Paper Guide Adjust
Auto Power Down
Print Header
Print Promotion
Reprint Mode
MCR Method
MCR Data
PRINT ALL LOGOS IN MEMORY
Menu Item
Print All Logos in Memory
Appendix A – Printer Configuration, Print All Logos In Memory
Values
0 to 1.0244"
0 to 1.2608"
0.08 to 2.80 ips
Front Mark, Distance
0.0394 to 2.5216"
-0.2955 to 0.2955"
-0.2955 to 0.3152"
-10 to +10
Values
A – I
None, 1 – 9
Off, 1-15 Minute Delay
No, Yes, Not Loaded
No, Yes, Not Loaded
Disabled, Enabled
Always On, Host Request
1 Track, 2 Track, 3 Track
Values
n/a
Appendix E – Printer Setup Menu Summary
Default Value
0
0
2.80 ips
Distance
1.2608"
0.0000"
0.0000"
0
Default Value
A
None
Off
Not Loaded
Not Loaded
Disabled
Host Request
1 Track
Default Value
n/a
Modify From
Control Setup
Panel Utility
Setup Method
Control Setup
Panel Utility
Modify From
Control Setup
Panel Utility
47