Using The Menu Button; Using The Submenu Button; Using The Align/Item And Up/Down Arrow Buttons; Exiting Setup - Printek PrintMaster 862 Operator's Manual

P R I N T E R C O N F I G U R A T I O N
After the above message has been shown, the display will change to the first menu available, which is the
FORMS MENU as shown below. In this case the display will also show the first submenu, which will be
the form that was selected when Setup was pressed.
FORMS MENU
Form 0

Using the MENU Button

At this time you may select a different menu by pressing the MENU button. Other menus available are the
INTERFACE MENU, the OPTIONS MENU, and the TEST MENU. Continue to press the MENU button to
select the desired menu. The MENU button may be pressed at any time to select a different menu.

Using the SUBMENU Button

The SUBMENU button selects additional menus that are related to the selected menu. For instance, if the
FORMS MENU has been selected, the SUBMENU button will select which form (Form 0 through Form
9) is to be set up. Note that not all menus have submenus. If no submenu is available, the bottom line will
be blank and the SUBMENU button will not be used.

Using the ALIGN/ITEM and UP/DOWN ARROW Buttons

Once the correct menu and submenu (if available) is selected, pressing the ALIGN/ITEM button will cause
the various items and their current values to be displayed. Note that the items and their values are right
justified. To scroll through the items available, repeatedly press the ALIGN/ITEM button. To change the
value of the displayed item, use the UP/DOWN ARROW buttons to step through the possible choices.
Remember to leave the correct value displayed before selecting a different item or menu, since "what you
see is what you get" when Setup Mode is exited.

Exiting Setup

To exit Setup Mode and automatically go on line, just close the lid . The display will now show one of the
messages below and automatically go on line.
Exiting Menus
Saving Changes
Exiting Menus
No Changes
20