Bluetooth Interface Configuration - Printek FieldPro RT43 Series Operator's Manual

Appendix C – Using the Bluetooth

Bluetooth Interface Configuration

The table below lists the menu items available, the values that may be selected, and the factory default value.
Which setup method may be used to change values is indicated by a checkmark.
Following the tables are detailed descriptions of each setup item. In the detailed descriptions an asterisk (*)
indicates the factory default value.
The Bluetooth Interface Menu items may be configured using either the Mobile Setup Utility or the printer's
internal Control Panel Setup feature as described in Appendix G. Before using the Mobile Setup Utility, please
read the following note and then refer to Appendix F.
Note: In order to use the Mobile Setup Utility, communications must first be established between the host
device running the utility and the printer. This may require that you first use the Control Panel Setup
to establish communications and then use the Mobile Setup Utility for final configuration or to
configure items in other menus.
INTERFACE MENU – Bluetooth Selected
Menu Item
Print Interface Settings
Emulation
Radio Pass-Thru
Pairing Mode
Security
Role Policy
Discoverability
Pin
Local Name
Print Interface Settings
Possible Values: None
Selecting this item will cause the current interface setup item values to be printed for reference.
Note that this item is only available when using Control Panel Setup.
36
®
Interface
Values
n/a
Printek, Oneil, ZPL-II, Mt3, CPCL,
MPL, IPL, ESim, TEC, EPOS,
HexDump
On, Off
Paired, Unpaired
On, Off
Defer, Master
On, Off
Up to 16 Numeric Characters
Up to 16 Alphanumeric Characters
Modify From
Default Value
Control
Panel
n/a
Printek
Off
Paired
Off
Defer
On
0
FP-Serial#
Setup
Utility